Place of Origin: | CHINA |
Brand Name: | PERFLEX |
Certification: | CE | RoHS | GB/T19001-2016/ISO 9001:2015 |
Model Number: | PSA-10 |
Packaging Details: | Plastic Double Tube | Paper Box/pieces |
---|---|
Delivery Time: | 7days |
Supply Ability: | 20million pieces / year |
Material: | Polyaspartic Resin Polymer + High-grade Pigments And Special Additives | Net Volume: | 50ML/400ML |
---|---|---|---|
Shelf Life: | 12 Months | Operation: | Easy To Operate By Caulking Gun |
Brand: | Perflex | Certificate: | France A+, CE, Rohs, ISO9001 |
High Light: | No Sagging Stone Bonding Material,Stone Bonding Material 400ML,Stone Bonding Adhesive Without Odor |
PSA Stone Bonding Material Without Ouder, Toxicity, And Cure Fast, Quick Set No Sagging
FEATURE
PRODUCT INTRODUCTION
Perflex Epro P-80 stone bond adhesive is a bi-component epoxy adhesive, made of high-tech polymer epoxy resin, hardener, high-grade pigments and additives.
It is pre-dosed automatically thanks to the cartridge where it is packaged. Part A and part B are located in two separate pipes, using the special nozzle-mixer together with the caulking gun with two pistons, the correct dosage of the components is obtained.
Regular polish and matt colors series are available.
COLOR AVAILABLE - 18 COLORS
CONSTRUCTION METHOD
1. After the mortar solidified, the joint of marble, tile, stone, etc must be cleaned, dried.
2. Use cleaning wax on both sides of the joint beforehand, pay attention not to wipe wax into the gap.
3. Twist the tube cap, install it on the head of the double-tube sealant, cut the spiral rubber nozzle obliquely at the head by 45 degrees (the opening size depends on the size of the tile seam), and then install it in the caulking gun.
4. Extrude about 20 cm colloid (in order to mix it fully and remove bubbles), then inject the glue into the joint that should be bonded
5. Press the ready glue on the joint surface with with the pressing plate.
6. After 3-6 hours (depending on the temperature), the glue cures completely, scrape off the excess glue on both sides of the gap with a scraper.
APPLICATION
PREBOND P-80 is developed for bonding marble, stone, granite, quartz and ceramic, for external and internal use.
Stone Bonding Adhesive PSA-10 Stone Bonding Adhesive MSA-10 is innovatively refined with new epoxy materials, which has excellent properties such as super anti-yellowing, bonding force and high hardness.
MECHANICAL PROPERTY
Testing Item | Resin A | Hardener B |
Appearance | Semi-fluid liquid | Thixotropic paste |
Blend Ratio(by volume) | A : B = 1 : 1 | |
Solid Content | 100% | |
Specific Gravity | 1.11 | |
Odor Grade | 3 | |
Chromatic Aberration △E | ≤1.5 | |
Working time(25℃*min) | 40 ± 5 min | |
Gel time in bulk (25℃*min) | 20 ± 5 min | |
Hardness(Shore D)≥ | 55 | |
Colloidal fluidity after blending | Thixotropic fluid | |
Bonding Strength/MPa | ≥5.0 | |
Wear Resistance (750 g.500 r)/g | 0.030 | |
Sagging after blending | No sagging | |
Tensile Shear Strength/MPa | Standard condition | ≥5.0 |
High/low temperature switch. | ≥3.0 | |
Water absorbent 25℃24 hour(%) | <0.2 | |
Waterproof / 24h | No change | |
Chemical Resistance / 2h | No change | |
Stain Resistance (Vinegar, soy, oil)/ 1h | No change | |
Testing condition: 21-25℃,relative humidity 45-55%. Constructed by caulking gun.
|
PRODUCT FEATURE
■ Non yellowing, super weather resistance and QUV resistance, good bonding, indoor & outdoor .
■ Good flexibility, endure more terrible temperature, no peeling off and crack.
■ Cured itself under the pretty low temperature even minus 35 degree.
■ All feature of Epoxy Tile Grout
Contact Person: Laura
Address: Changsha . Hunan China
Factory Address:Baofeng Industrial Zone, Shashi County, Liuyang Changsha City, Hunan China