ISO9001 Waterproof Tile Grout No Discolored Mapei Replacement

Never Yellowing White Tile Grout P-30 Polyaspartic Weather Resistance waterproof Canada USA

ABOUT PERFLEX

^{PERFLEX concentrates on the chemical construction materials manufacture and technology resarch with two production bases by saperate lab in China. Perflex has strong R&D Dept and established joint research with high polymer chemical lab of South China University of Technology and Sun Yat-sen University for self-cleaning materials, nano materials and functional materials innovation research. PERFLEX complys with quality control system GB/T19001-2016/ISO 9001:2015, furthermore the products have CE SGS FDA certificate already. Perflex has own patent towards its tile grout, tile sealer and polyaspartic coating system.}

^{PERFLEX insists on easier decoration work and durable products research, with strength of high technology, good quality and continuous innovation. Chemical technology innovation promotes our growth. To create more and more popular inherit fantastic technique is our unremitting pursuit. PERFLEX adopts three core technology: Poyaspartic technology, Nano self-cleaning and high purity technology, to innovate healthier product with excellent quality and less cost. Product line : 1- Cartridge Tile Grout Series 2- Waterproof Tile&Grout Sealer Series 3- Eco-friendly Polyaspartic coating Series. Flooring System/Waterproof System/ Anti-corrosion System.}

P-30 TDS Polyaspartic Grout.pdf 

^{No need to have grout cleaning, re-caulking, grout coloring, grout repair and grout sealing service again for your house! Have you ever thought that a tile grout once being grouted can do it, it can be non-discolored, stain resistance, anti-mould and durable for over 30 years. Perflex gives you the answer !}

PRODUCT INTRODUCTION

^{Perflex Polyaspartic Tile Grout P-30 is a two-component polyasparitc joint grout, made of high-tech polymer polyaspartic resin, isocyanate hardener, high-grade pigments and additives. It is a semi-fluid liquid, packed into two-component plastic cartridge packaging, it can easily operate by automatic caulking gun. It’s 100% solid content, zero VOC, non-toxic materials that can be cured under low temperature above -25℃. As the best QUV resistance materials, P-30 polyaspartic tile grout is super non yellowing over 50 years.}

^{1. After the mortar solidified, the ceramic tile crevice must be cleaned, the impurities and dust in the ceramic tile crevice must be cleaned up with wallpaper knife and vacuum cleaner.}

^{2. Use cleaning wax on both sides of the gap beforehand with proper amount, pay attention not to wipe wax into the gap.}

^{3. Twist the tube cap, install it on the head of the double-tube sealant, cut the spiral rubber nozzle obliquely at the head by 45 degrees (the opening size depends on the size of the tile seam), and then install it in the rubber gun.}

^{4. Extrude about 20 cm colloid (in order to mix it fully and remove bubbles), then inject the glue into the crevice of ceramic tile.}

^{5. Press the ready glue on the crevice with with the seam press or steel ball.}

^{6. After 4-24 hours (depending on the temperature), the glue cures completely, scrape off the excess glue on both sides of the gap with a scraper.}