Stain Resistance Waterproof Tile Grout No Cracking And Chalking

No Yellowing White Waterproof Tile Grout Perflex Polypro P-30,

P-30 TDS Polyaspartic Grout.pdf 

^{When it comes to grouting, your competitors are using traditional epoxy grout which is slow, messy, and you have to spend hours and hours for the training, because it's easy to make a mistake when mixing, string or the actual grouting! Meanwhile, you are using a much more convenient Perflex's P-30 cartridge polypro tile grout that is easy to operate, never discolor and anti-Quv which makes it suitable for outdoor environment as well. Just picture that !}

^{Perflex Polyaspatic Tile Grout P-30 is a revolutionary new product to be non yellowing, no cracking and chalking, super weather resistance, named " Grout King". What is the polyasparitc materials? Polyaspartic is premium anti-corrision and waterproof materials, usually polyaspartic materials applys in concrete and metal surface protection under terrible environment like windmill, heavy duty machine, offshore platform, rail concrete protection, swimming pool and roof waterproof, etc. It has super adhesion to tiles, ceramic tile, marble.}

CONSTRUCTION METHOD

^{1. After the mortar solidified, the ceramic tile crevice must be cleaned, the impurities and dust in the ceramic tile crevice must be cleaned up with wallpaper knife and vacuum cleaner.}

^{2. Use cleaning wax on both sides of the gap beforehand with proper amount, pay attention not to wipe wax into the gap.}

^{3. Twist the tube cap, install it on the head of the double-tube sealant, cut the spiral rubber nozzle obliquely at the head by 45 degrees (the opening size depends on the size of the tile seam), and then install it in the rubber gun.}

^{4. Extrude about 20 cm colloid (in order to mix it fully and remove bubbles), then inject the glue into the crevice of ceramic tile, ensure that grouting time is within 15min for 1 tube, otherwise the glue will be semi-cured, or if stop for while during grouting, take on the cap tightly for tube, then grouting can be continuing by change a new nozzle.}

^{5. Press the ready glue on the crevice with the seam press or steel ball.}

^{6. After 4-24 hours (depending on the temperature), the glue cures completely, scrape off the excess glue on both sides of the gap with a scraper.}

CAULKING TOOLS KIT - ONE STOP SUPPLYING

^{In order to support customers, Perflex works with demostic grouting tools manufacturer like Nicejoon to custom-made durable | efficient | power saving tools that fit Perflex innovated tile grout perflectly. By one-stop puchasing for customers, Perflex customer can save cost and time to concentrate on innovated tile grout marketing.}