|Minimum Order Quantity:||200 pails|
|Packaging Details:||5 L/10L/20L per pail|
|Delivery Time:||7days around|
|Supply Ability:||20000 Ton annually|
|MATERIAL:||Polyaspartic Resin + Isocyanate Hardener||Blend Ratio:||A : B = 1 : 1|
|Color:||Transparent Or Pigmented||Feature:||Good Bonding | Weather Resistance|
|Package:||5L | 10L | 20L / Pail||Application:||Park | Road | Garden | Swimming Pool Flooring|
High Abrasion Resistant Polyaspartic Floor Coating,
Solvent Free Polyaspartic Floor Coating,
Solvent Free Polyaspartic Coating
PA6375 Solvent Free High Abrasion-resistant Polyurea Top Coating
It consists of polyaspartic resin,isocyanate,white corundum sand and diluent.
Curing method:It can cure at normal temperature(0-35℃)
Application:High wear-resistant topcoat of floor coating
High solid content,excellent weatherability,semimatte,high surface hardness,excellent wear resistance.
A component 2.28kg, B component 0.45kg, C component 0.57kg, D component 1.70kg. (proportioning 100:20:25:75)
The main design is used in parking lot, commercial decoration and office floor. It is especially suitable for high wear resistance and high requirements of light protection and color protection, and can also be used in outdoor direct sunlight environmental.
Material Base Data(25℃,60%RH)
Mixed Material Data (25℃,60%RH)
Mixing proportion (excluding aggregates):1.05
Mixed solid (containing aggregates):90%
Dry time of appearance:2hr
Opening time of walking:8hr
Opening time of heavy objects:48hr
Material Properties After Curing
Film appearance:Semi gloss mild antiskid surface
7 days hardness:4H
Wear (CS17 wheel 750g, 500 turn):15mg
Impact resistance (500g, 1M):Pass through
Relation Between Operational Time and Temperature and Humidity
|Touch dry time||2hr||2hr|
|Tack Free time||8hr||6hr|
Construction is forbidden when humidity is more than 85%RH.
The components of curing agent are liable to deteriorate in water vapor and must be sealed and dried during storage.
Guide to Use
1.After mixing, the material must be poured all over the floor and then scraped, so as to prevent the aggregate from sinking, resulting in poor surface effect.
2.Use the first batch of scraping and roll coating construction method.
3.Dosage is strictly controlled in 0.08~0.1kg/m2, avoiding accumulation, otherwise foaming is serious.
4.This material is very demanding for construction. It must be trained by our company's professional training before use.
Ideal storage condition is 5-35 degree cool and dry place, avoid sunshine exposure.
Contact Person: Laura