|Place of Origin:||CHINA|
|Certification:||CE | RoHS | GB/T19001-2016/ISO 9001:2015|
|Packaging Details:||Plastic Double Tube | Paper Box/pieces|
|Supply Ability:||20million pieces / year|
floor grout sealer,
backsplash grout sealer
TDS | PW-600 TILE GROUT SEALER | WATERPROOF | Leakproof | Anti-slip | Tile Restoration
PW-600 Outdoor Waterproof Tile Sealer / Coat consists of Polyaspartic resin, non-yellowing weather resistance isocyanate and additives.
■ Super weather resistance, non yellowing
■ Ultra clear and can pigmented
■ Environmental protection, odorless, zero formaldehyde
■ Good adhesion to tiles and concrete
■ Excellent impact resistance and elongation at break
■ Simple construction and quick drying
|Solid content by weight||≥95±2% (Part A and Part B mixed)|
|Tensile strength(MPa)||10MPa (400-600um)|
|Adhesion to primer(MPa)||≥4MPa|
|Salt resistance 240h(3%NaCl)||Perfect film, no bubble|
|Alkali resistance 240h(5%NaOH solution)||Perfect film, no bubble|
|Acid resistance 240h(5%H2SO4)||Perfect film, no bubble|
|Waterproof property 30 days(25℃)||Perfect film, no bubble|
Waterproof construction for concrete or tile base, especially waterproof repair for exterior wall.
|Color||Clear transparent (color can be formulated)|
|Viscosity||700-1000CPS(25℃,Part A and Part B mixed)|
|Density||Clear coat 1.03±0.03g/cm3；Pigmented 1.1±0.05g/cm3|
|Gloss||Semi - gloss|
|Film thickness||Dry film:200－300 um||Wet film:200－300μm|
|Theoretical Value||9.0 sq.m/Kg/100μm|
|Actual value||related to surface treatment, outside environment, application method and variety of factors.|
Usage ratio : Brush or scrape: Part A:Part B:Diluent＝1:1 by weight, mix it thoroughly before applying.
|Pot life after mixing(min)||40-50||30-40||20-30||15-20|
Ambient temperature: 5℃-30℃,Ambient moisture:≤85%
Substrate temperature: 3℃ higher than dew point
Application method:Brushing /Rolling /Spraying
|Airless spray(2 components)||Recommend|
|Spray nozzle size||0.19－0.23|
Cleaning agent:Standard Polyaspartic diluent
remark:if use air spray or brush and roller , please consult our engineer prior to application
Drying time and recoat window
|Finger press dry(hrs)||15||12||10||8|
Statistics above is only for guidance, actual drying time and recoat window could be changeable, depends on film thickness, ventilation, humidity, undercoat, loading demand and mechanical strength.
If concrete as substrate, primer recommend: polyurea primer, polyurea intermediate coating, or refer to our company's recommended match coat.
1- Wash away salt and other water-soluble pollutants with clear water
2- Use proper detergent and degreaser to remove grease
3- Confirm that the surface is clean and dry before construction
4- Pay attention to the painting interval with primer during construction Storage Condition
Part A:1KG or 5KG or 20KG
Part B:1KG 5KG or 20KG
Part A:12 months Part B: 12 months
l Avoid touching skin or eyes
l In case of skin contact, wash affected area with moderate cleaning agent. In case of eye contact, wash with plenty of water and go to hospital immediately.
l Ensure good ventilation
l Coating contains flammable matter. Keep it away from spark and smoking around construction area is forbidden
l Please observe all health safety regulation
The information in product specification is totally base on our acknowledge in lab and practice. Because the usage of product usually is out of our control, we only provide assurance of our product quality. We reserve the rights of modifying this specification without prior notice.
Contact Person: Laura
Address: Changsha . Hunan China
Factory Address:Baofeng Industrial Zone, Shashi County, Liuyang Changsha City, Hunan China