Non Yellowing Outdoor Tile Sealer / Exterior Tile Sealer Environmental Protection

TDS | PW-600 OUTDOOR WATERPROOF TILE SEALER | Leakproof | Anti-slip | Tile Restoration 

 

 

PW-600 Outdoor Waterproof Tile Sealer / Coat consists of Polyaspartic resin, non-yellowing weather resistance isocyanate and additives.

 

 

■ Super weather resistance, non yellowing

■ Ultra clear and can pigmented

■ Environmental protection, odorless, zero formaldehyde

■ Good adhesion to tiles and concrete

■ Excellent impact resistance and elongation at break

■ Simple construction and quick drying

■ Anti-slip

 

 

Waterproof construction for concrete or tile base, especially waterproof repair for exterior wall.

 

 

Item	Technical Data
Solid content by weight	≥95±2% (Part A and Part B mixed)
Tensile strength(MPa)	10MPa (400-600um)
Break elongation(%)	≥200%
Tear strength(kN/m)	≥40
hardness(Shore A)	≥70
Adhesion to primer(MPa)	≥4MPa
Abrasion resistance(750g/500r)/ug	≤20
Salt resistance 240h(3%NaCl)	Perfect film, no bubble
Alkali resistance 240h(5%NaOH solution)	Perfect film, no bubble
Acid resistance 240h(5%H2SO4)	Perfect film, no bubble
Waterproof property 30 days(25℃)	Perfect film, no bubble

 

Item	Technical Data
Color	Clear transparent (color can be formulated)
Flash point	90±2℃
Viscosity	700-1000CPS(25℃,Part A and Part B mixed)
Density	Clear coat 1.03±0.03g/cm3；Pigmented 1.1±0.05g/cm3
Gloss	Semi - gloss
Film thickness	Dry film:200－300 um	Wet film:200－300μm
Theoretical Value	9.0 sq.m/Kg/100μm
Actual value	related to surface treatment, outside environment, application method and variety of factors.

 

 

Usage ratio : Brush or scrape: Part A:Part B:Diluent＝1:1 by weight, mix it thoroughly before applying.

Working time:

 

Temperature(℃)	5	10	20	25
Pot life after mixing(min)	40-50	30-40	20-30	15-20

 

 

 

 

Application condition

Ambient temperature: 5℃-30℃,Ambient moisture:≤85%

Substrate temperature: 3℃ higher than dew point

Application method:Brushing /Rolling /Spraying

 

Airless spray(2 components)	Recommend
Spray nozzle size	0.19－0.23
Exit pressure	100－120kg.cm3

 

Cleaning agent:Standard Polyaspartic diluent

remark:if use air spray or brush and roller , please consult our engineer prior to application

 

Drying time and recoat window

 

Temperature(℃)	5	10	20	30
Touch dry(hrs)	3.5	3	2.5	2
Finger press dry(hrs)	15	12	10	8
Recoat window(hrs)	12	10	8	6

 

Statistics above is only for guidance, actual drying time and recoat window could be changeable, depends on film thickness, ventilation, humidity, undercoat, loading demand and mechanical strength.

 

 

If concrete as substrate, primer recommend: polyurea primer, polyurea intermediate coating, or refer to our company's recommended match coat.

 

 

1- Wash away salt and other water-soluble pollutants with clear water

2- Use proper detergent and degreaser to remove grease

3- Confirm that the surface is clean and dry before construction

4- Pay attention to the painting interval with primer during construction Storage Condition

 

 

Part A:12 months Part B: 12 months

 

 

0℃－30℃

 

 

Part A:1KG or 5KG or 20KG

Part B:1KG 5KG or 20KG

 

 

l Avoid touching skin or eyes

l In case of skin contact, wash affected area with moderate cleaning agent. In case of eye contact, wash with plenty of water and go to hospital immediately.

l Ensure good ventilation

l Coating contains flammable matter. Keep it away from spark and smoking around construction area is forbidden

l Please observe all health safety regulation

 

 

The information in product specification is totally base on our acknowledge in lab and practice. Because the usage of product usually is out of our control, we only provide assurance of our product quality. We reserve the rights of modifying this specification without prior notice.