Indoor Colored Grout Sealer / Floor Grout Sealer For Toilet Simple Construction

TDS | PW-100 WATERPROOF TILE GROUT SEALER | Leakproof | Anti-slip | Tile Restoration 

 

 

^{PW-100 Indoor Waterproof Tile Sealer consists of Polyaspartic resin, non-yellowing prepolymer and additives.}

 

 

^{Waterproof repair of the ceramic tile/marble/granite/ natural stone surface of the kitchen and toilet.}

 

 

^{■ Anti-slip}

^{■ Ultra clear, improve the gloss of the old tile}

^{■ Environmental protection, odorless, zero formaldehyde}

^{■ Good adhesion to tiles}

^{■ Excellent impact resistance and elongation at break}

^{■ Simple construction and quick drying}

 

 

 

Item	Technical Data
Solid content by weight	≥100 %(Part A and Part B mixed)
Tensile strength(MPa)	10MPa (400-600um)
Break elongation(%)	≥100%
Tear strength(kN/m)	≥60
hardness(Shore A)	≥70
Adhesion to primer(MPa)	≥10MPa
Abrasion resistance(750g/500r)/ug	≤20
Salt resistance 240h(3%NaCl)	Perfect film, no bubble
Alkali resistance 240h(5%NaOH solution)	Perfect film, no bubble
Acid resistance 240h(5%H2SO4)	Perfect film, no bubble
Waterproof property 30 days(25℃)	Perfect film, no bubble

 

 

 

Item	Technical Data
Color	Clear transparent (color can be formulated)
Flash point	98±3℃
Viscosity	600±200CPS(25℃,Part A and Part B mixed)
Density	1.05g/cm3
Gloss	High gloss
Film thickness	Horizon Dry film:200－300 um	Wet film:200－300μm
	Vertical dry film:200－300 um	Wet film:200－300μm
Theoretical Value	9 .3 sq.m/Kg/100μm
Actual value	related to surface treatment, outside environment, application method and variety of factors.

 

 

^{Brush or scrape: Part A:Part B:Diluent＝1:0.6 by weight,mix it thoroughly before applying.}

^{Working time:}

Temperature(℃)	5	10	20	25
Pot life after mixing(min)	40-50	30-40	20-30	15-20

 

 

 

 

 

^{Ambient temperature: 5℃-30℃,Ambient moisture:≤75%}

^{Substrate temperature: must 3℃ higher than dew point}

^{Application method:Brush or Scrape}

^{Cleaning agent:Standard Polyaspartic diluent}

^{Drying time and recoat window:}

Temperature(℃)	5	10	20	30
Touch dry(hrs)	3	2.5	2	1.5
Finger press dry(hrs)	12	10	6	5

 

^{Statistics above is only for guidance, actual drying time and recoat window could be changeable, depends on film thickness, ventilation, humidity, undercoat, loading demand and mechanical strength.}

 

 

^{1- Clean the residue of ceramic tile with a rag.}

^{2- Pour appropriate putty powder or other powder on the tile surface, and then use rags or emery cloth to repeatedly force the powder on the tile surface to remove polishing wax and stains on tile surface.}

^{3- Clean the powder and water on the tile surface.}

^{4- It is recommended to apply the special interface agent once on the smooth tile surface.}

 

 

^{Shelf life:Part A:12 months Part B: 12 months}

^{Storage temperature: 0℃－30℃}

 

 

^{Part A:1KG}

^{Part B:0.6KG}

 

 

^{l Avoid touching skin or eyes}

^{l In case of skin contact, wash affected area with moderate cleaning agent. In case of eye contact, wash with plenty of water and go to hospital immediately.}

^{l Ensure good ventilation}

^{l Coating contains flammable matter. Keep it away from spark and smoking around construction area is forbidden}

^{l Please observe all health safety regulation}

 

 

^{The information in product specification is totally base on our acknowledge in lab and practice. Because the usage of product usually is out of our control, we only provide assurance of our product quality. We reserve the rights of modifying this specification without prior notice.}